NOTE: This feature is only compatible with model years 2005 to 2020.

Many speedometers read incorrectly. The Centurion provides a quick and easy calibration tool. This feature allows the user to calibrate the speedometer with two known values: the target speed and the speedometer reading. The target speed is the actual speed reported by a dyno or GPS. The speedometer reading is the value reported by the speedometer when the motorcycle is in motion.

NOTE: If the ECU is locked by another product, you will NOT be able to perform any active settings changes as we will not be able to communicate with the ECU.

For a complete and thorough walk through of the entire procedure, click HERE.

1. Select the Active Settings Icon ( )
2. In the first dropdown menu select 'Speedometer'
3. In the second dropdown menu select 'Speedometer Calibration'
   
4. Ensure that the key is on, the run button is on, and that the VCM is connected.
5. Click 'Read'.
   
6. Input the Target Speed, this is the speed that the speedometer SHOULD show.
   
7. Input the speed reported by the Speedometer.
   
8. Click Calibrate.