Table of Contents
- Introduction
- Main Features
- How To Setup TR4 System
- All TechnoResearch Cables
- Troubleshooting
- Common Jobs
- Updating Centurion License
- Non-Stock ECUs
- Connecting via Bluetooth
- Victory / Indian Diagnostics
- Checking DTCs Manually (HD)
- FAIL message When Performing Blank ECU Programming
- 1. Centurion Setup and Installation
- 1.1 Where to get the Software
- 1.2 Install Centurion
- 1.3 Run Centurion
- 1.4 Insert Security Key into USB Port
- 1.5 Connect USB Cable
- 1.6 Powerup the Centurion
- 1.7 Powerup to Automatically Install Drivers
- 1.8 Update the Centurion Software
- 1.9 Centurion Disclaimer/Language Selection
- 1.10 Confirm COM Port for Communication
- 1.11 Troubleshooting COM Port Issues
- 2. Using the Centurion
- 3. Centurion Toolbar Icon Description
- 4. Centurion – How to Change Units/Colors
- 5. Centurion Super Pro/Audio – Monitor Real-Time Data (Digital Data View)
- 6. Centurion Super Pro/Audio – Monitor Real-Time Data (Strip Chart Display)
- 7. Centurion Super Pro – Harley Davidson Tests and Activations
- 8. Centurion – Specific Functions for Harley-Davidson® Motorcycles
- ECU/ECM
- 8.1 Centurion Super Pro/Audio – Read And Clear DTCS
- 8.2 Centurion Super Pro – Speedometer Calibration
- 8.6 Centurion Super Pro – Air Fuel Value (AFV)
- 8.7 Centurion Super Pro – Idle Adjustment
- 8.8 Centurion Super Pro – Blank ECU Programming
- 8.9 Centurion Super Pro – Blank Ecu Programming (Clone)
- 8.11 Centurion Super Pro – Module Replacement (4-Pin Models)
- 8.12 Centurion Super Pro – Module Replacement (6-Pin Models)
- 8.13 Centurion Super Pro – ECU: (Enable/Disable)
- 8.17 Centurion Super Pro – Fuel Tank Drain
- 8.18 Centurion Super Pro – Compression Test
- TSM-TSSM-HFSM-BCM
- 8.3 Centurion Super Pro – Hands Free Keyfob Programming
- 8.4 Centurion Super Pro – Keyfob Disabling (Hands Free Fob Only)
- 8.5 Centurion Super Pro – Program Personal Identification Number (Pin) / Personal Key Code
- 8.19 Centurion Super Pro – BCM: (Enable/Disable)
- 8.20 Centurion Super Pro – BCM-Lights: (Enable/Disable)
- 8.22 Centurion Super Pro – Unlocking A Security Module
- 8.23 Centurion Super Pro – Security: Push Button Fob Manual Programming
- INFOTAINMENT
- INSTRUMENTATION
- ABS
- TPMS
- ECU/ECM
- 9. Location of Diagnostic Connectors
- Centurion Glossary
All TechnoResearch Cables
Cables for TR4 VCM
TR4 2021 HD Cable (Part No. TR4C007)
– Used to connect to 2021 Harley Davidson motorcycles with TR4 device.
TR4 4 PIN HD Cable (Part No. TR4C001-XX)
– Used to connect to J1850 4 PIN motorcycles with VCM.
TR4 6 PIN HD Cable (Part No. TR4C002-XX)
– Used to connect to CAN bus 6 PIN motorcycles with VCM.
TR4 Extension Cable (Part No. TR4B001-XX)
– Used as an extension cable connecting from the 4/6 PIN cable to the VCM TR4.
TR4 Y-Cable (Part No. TR4010)
– The cable combines the old (4 PIN) and the newer (6 PIN) data port styles for less wear and tear on your VCM-TR4.
TR4 OBD Victory/Indian Cable (Part No. TR4C005-XX)
– Pre 2007 Diagnostic Cable for VCM.
TR4 Victory/Indian Cable (Part No. TR4C006-XX)
– Post 2007 Diagnostic Cable for VCM
.
Security Cable (TR3/TR4)
– Used for extracting the 5-digit PIN from a TSSM/BCM security system on 6 PIN CAN bus motorcycles only.
Cables for TR3 VCM
TR4 2021 HD Cable (Part No. TR4C007)
– Used to connect to 2021 Harley Davidson motorcycles with TR4 device.
TR3 4 PIN HD Cable (Part No. TR3C001-XX)
– Used to connect to J1850 4 PIN motorcycles with VCM.
TR3 6 PIN HD Cable (Part No. TR3C002-XX)
– Used to connect to CAN bus 6 PIN motorcycles with VCM.
TR3 Extension Cable (Part No. TR3B001-XX)
– Used as an extension cable connecting from the 4/6 PIN cable to the VCM.
TR3 Main Cable (Part No. TR3A001-XX)
– Used for older TR3 models to connect from the VCM to the 4/6 PIN cable.
TR3 OBD Victory/Indian Cable (Part No. TR3C006-XX)
– Pre 2007 Diagnostic Cable for VCM.
TR3 Victory/Indian Cable (Part No. TR3C005-XX)
– Post 2007 Diagnostic Cable for VCM.
Cables for TRo2
TRo2 Adapter Cable w/ Battery Tender
– Used as an adapter with battery tender for the TRo2 to be able to plug in and power the TRo2 with both TR3/TR4 VCMs.
TRo2 Sensor System
- This wideband oxygen sensor interface kit is essential for anyone looking to get robust and accurate data to tune a motorcycle. The TRO2 is a dual channel air/fuel ratio metering system that was designed to be used with a data logging system (a dyno) or our Mobile Dyno feature.
