This feature is used to change the Units displayed on the Instrumentation Cluster. It can be toggled between Miles and Kilometers.

NOTE: Feature should work on 2008 and newer models. Older models MAY work, but it is variable.

1. Select the Active Settings Icon ( )
2. In the first dropdown menu select 'Instrumentation Cluster'
   
3. In the second dropdown menu select 'Speedometer (Units)'
   
4. Click the 'Start' button
   
5. Select the option you want. (KM or MILES) Then click OK.
   
6. Wait for the "PASS". Then cycle IGN and review changes in the cluster.