Table of Contents

8.4 Keyfob Disabling (Hands Free Fob Only)

Centurion Super Pro

NOTE: If the ECU is locked by another product, you will NOT be able to perform any active settings changes as we will not be able to communicate with the ECU.
  1. Select the Active Settings Icon ( )
  2. Select KeyFob from Active Settings drop down list.
  3. Turn the Key to ignition and the Run switch to 'Run'.
  4. Click on the 'Get Stored Fob Values' button to test the system.
  5. To disable the KeyFobs, press the disable button or program all '0000'.