Table of Contents

Flashing with a USB License


The Direct Link USB License requires shop hardware, the VCM-TR3 or VCM-TR4, to use. The physical USB key will lock to the first motorcycle ECU it is used on and will permit continued programming of that motorcycle ECU.

  1. Plug in the RED USB key in to the computer as well as the VCM-TR3/TR4 device to the computer with one end via USB cable and plug in the other side to the motorcycles diagnostic connector via 4PIN/6PIN cable.
  2. Launch the software through the TechnoResearch Launcher
  3. In the Direct Link software, click "Get ECU Details" in box number one.
  4. You will then be prompted to back up the existing map in the motorcycle, we recommend you do this before reflashing the ECU.
  5. You are now ready to choose a base map to flash and program the ECU with.
Direct Link USB License Key