Table of Contents

3.3.4 Throttle Grip


This table sets the maximum throttle valve opening at a specific throttle grip setting and RPM. This table needs to be set before any tuning is done. It should be customized to the grip strength of the rider. Maximizing the values will result in a very responsive throttle (think bumpy roads). Lowering values will result in delayed responses from the throttle. Consult with the rider to determine the preferred settings.

PLEASE NOTE:This is only applicable to DBW (Drive by Wire) systems. Cable systems are not controlled by the ECU and will not have this table.
Direct Link Throttle Blade